Aerial Opti-Rack

The Moore OptiRack is designed to allow storage of fiber optic cable on the strand. The lightweight aluminum OptiRack ensures that the minimum bend radius is not compromised during installation and over the life of the system. The Moore OptiRack mounts on the strand with offset mounting brackets. OptiRacks are installed horizontally and the cable is wrapped in a figure 8 loop between racks.

Data Sheet

Five size options provide flexibility to accommodate various cable manufacturers’ diameter and bend radius products. Each OptiRack price includes a pair of OptiRacks and may be ordered with or without mounting equipment. Eight slots are provided for tie wrapping the fiber to the rack. Slots in the side flange enable the tie wrap to firmly hold the fiber against the OptiRack. Slots in the top of the rack are most critical to prevent the cable from sliding forward and to maintain the bend radius in the portion of the loop. The edges of the flange at the V of the Moore OptiRack are rounded and welded to prevent damage to the fiber.

Product Diagrams

(Optional: click to see full-size images)

    • Ordering Information
      Pair Part # Radii Length Channel Width Mounting Kits
      MFSR12-1 6” 20” .625” –
      MFSR12-1K 6” 20” .625” 4 Brackets
      MFSR15-1 7.5” 23” .625” –
      MFSR15-1K 7.5″ 23″ .625″ 4 Brackets
      MFSR18-1 9″ 28″ .625″ –
      MFSR18-1K 9″ 28″ .625″ 4 Brackets
      MFSR12-3 6” 20” 1.25” –
      MSFR12-3K 6” 20” 1.25” 4 Brackets
      MFSR15-3 7.5” 23” 1.25” –
      MFSR15-3K 7.5” 23” 1.25” 4 Brackets
      MFSR18-3 9” 28” 1.25” –
      MFSR18-3K 9” 28” 1.25” 4 Brackets
      MFSR20-HC 10” 33” 1.25” –
      MFSR20-HCK 10” 33” 1.25” 4 Brackets
      MFSR24-HC 12” 41” 1.25” –
      MFSR24-HCK 12” 41” 1.25” 6 Brackets

      Back to top